1. Proper positioning and placement Place the system on the kitchen counter. Remove all the system components, filter from box and determine the location where the purifier is to be kept.
After placing the system, install and all the components in the box and the membrane in membrane housing. While installing the membrane pay attention; pust the membrane slowly inside the housing.

2. Connecting the water supply Find out a tab of raw water source to check and check it properly; a little amount of pressure should be applied. Connect the raw water supply to the raw water input of the system, through a pipe (given with the system).

3. Starting up Switch ON the system and open the raw water input tap. Carefully check the system for leaks. After 5 minutes the water will start dropping in the water tank. When the tank is full, open the tap of purifier and flush all the water out.
Do not drink the water the first time the tank is square in after installation.
After the tank is filled again, you can enjoy the purified water.